C. Sherman Johnson

Over Center Snap Gate Hook for 3/16" Wire with 1/4" WireThe latest and best design yet. Features the “over center” design with no load on the swin...

T-Style Jaw/Jaw Open Body Turnbuckle - 5/16-24 ThreadFor those who prefer a traditional body turnbuckle. The forged silicon bronze body, coupled w...

Spreader Flag Halyard KitIncludes 40ft. of polyester line, block with bail and shroud cleat.

Pulpit Anchor for 1" RailThis fitting can be used on the stern rail and bow pulpit to terminated jaw fittings for lower or upper life lines. (1/2"...

Stanchion Eye for 1" StanchionThis fitting is used on a stanchion for adding lower life lines without the need to drill holes for the cable to pas...

Eye to Deck Toggle FittingThis fitting can be mounted to any flat surface and accept life line fittings, line, etc. Toggling action is 140 degrees...

Eye to Jaw FittingThis fitting will convert a small bail at the stern rail to the standard gate eye to accept the over center gate hook. Specifica...

Eye to Eye Adjustable FittingThis fitting can be used wherever an eye is required on each side of the stanchion. Adjustable between 3/4" and 1".  ...

Short Adjuster for 3/16" WireGenerally used at the stern rail in conjunction with the single gate eye to tension that section of the gate.Specific...

Short Adjuster for 1/8" WireGenerally used at the stern rail in conjunction with the single gate eye to tension that section of the gate.Specifica...

"T" Style Toggle Jaw for 3/16" WireGenerally used at the stern rail when no gate is required with a turnbuckle forward. Specifications: Lifelines:...

"T" Style Toggle Jaw for 1/8" WireGenerally used at the stern rail when no gate is required with a turnbuckle forward. Specifications: Lifelines: ...

Deck Toggle "T" Style for 3/16" WireThis fitting can be used wherever a cable needs to be terminated to a deck or bulkhead. Specifications: Lifeli...

Deck Toggle "T" Style for 1/8" WireThis fitting can be used wherever a cable needs to be terminated to a deck or bulkhead. Specifications: Lifelin...

Double Threaded Interlocking Gate Eye for 3/16" WireA single eye is used on one end of the gate area and threaded into eye nut. Specifications: Li...

Double Threaded Interlocking Gate Eye for 1/8" WireA single eye is used on one end of the gate area and threaded into eye nut. Specifications: Lif...

Interlocking Swivel Gate Eye for 3/16" WireAn interlocking gate eye is used at the opposite end of the gate hook as a "hinge" for the gate. Specif...

Interlocking Swivel Gate Eye for 1/8" WireAn interlocking gate eye is used at the opposite end of the gate hook as a "hinge" for the gate. Specifi...

Single Threaded Gate Eye for 3/16" WireA single eye is used on one end of the gate area and threaded into eye nut. Specifications: Lifelines: Yes ...

Single Threaded Gate Eye for 1/8" WireA single eye is used on one end of the gate area and threaded into eye nut. Specifications: Lifelines: Yes R...

Single Swivel Gate Eye for 3/16" WireA single eye is used on one end of the gate area to attach the gate hook. Specifications: Lifelines: Yes Runn...

Single Swivel Gate Eye for 1/8" WireA single eye is used on one end of the gate area to attach the gate hook. Specifications: Lifelines: Yes Runni...

Deck Toggle Turnbuckle to Hand Crimp Terminal for 3/16" WireThis "T" bolt style fitting is used on decks or bulkheads. T-316 stainlessSpecificatio...